Jessica L. Rush
Hanover,PA
Overview
11
11
years of professional experience
Work History
Inspector
Cleveland Cliffs
05.2024 - Current
- Documented appropriate quality inspection report information.
- Performed final quality inspection of finished products based on established procedures.
- Use cone grinders and or chamfer guns to clean head of the rail after coming from the saw.
- Ensure there stamping on the web of the rail and write the accurate spec code for that heat.
- communicate with saw operators to accurately write lengths.
- Paint heads of rail with whatever color used for the heat stamped on the web.
- Walk over and examine each rail to check for possible defects and correct if possible whether scraping the piece , putting it into the system as a lower quality heat , or measure to be re cut to a different length to remove possible defect.
- print shipping labels for each rail matching the stamping on the web.
- Measure all rails to ensure they are within tolerance and correctly marked.
- use spud guns to clean up drill holes
- Ensure drilling is correct.
- Communicate with all team members to ensure quality product is being made.
- Document all rails that were made into scrap.
Saw Operator
Cleveland Cliffs
05.2024 - Current
- Adapted to varying project requirements by quickly learning new techniques and adjusting saw settings as needed.
- Monitored and inspected sawing machine operations to detect any malfunctions.
- Mounted workpieces in holding device, manually, or using hoist.
- Ensured accurate record-keeping by documenting material cuts, machine adjustments, blade changes, and general maintenance activities in daily logs.
- Set controls to adjust speed, feed rate and blade tensions.
- Trained newly hired employees on machine operations and control set ups, explaining safety procedures to prevent injuries.
- Supported a positive work environment with strong communication skills, effectively collaborating with team members on shared tasks.
- Delivered reliable results by consistently producing precise cuts within project tolerances and specifications.
Overhead Crane Operator
Cleveland Cliffs
05.2022 - 05.2024
- Operate 50T double hoist / double trolley over head center cab crane
- Operate 35T single hoist / single trolley side cab crane
- Assisted in training new crane operators, sharing expertise and fostering a culture of safety within the team.
- Consistently met daily production goals through effective time management skills while also focusing on safety precautions.
- Performed critical lifts requiring expert precision, showcasing exceptional knowledge of weight limitations and balance points for different load types.
- Loaded steel rail onto flatbed trucks or railroad cars.
- Collaborated with ground crews to ensure clear communication, resulting in a smooth workflow and safer work environment.
- Improved workplace safety by conducting thorough crane inspections and maintaining proper crane operation.
- Positioned cranes in response to hand signals and observed load hookup to determine safe load capacities.
Warehouse tech / Inventory & logistics
Epiroc, Harrisburg
01.2020 - 05.2022
- Performed material handling processes to improve delivery accuracy and productivity.
- Inspected product for freight damage and verified cartons, items and packing slip accuracy
- Operating standard warehouse equipment, assisting with loading and unloading deliveries.
- Stacked cargo in assigned warehouse locations with pallets and crates, loading and unloading goods and supplies.
- Replenished inventory with focus on customer needs
- Considered individual product requirements and accessibility needs to maximize efficiency of warehouse storage areas
- Organized storage of parts in bins, floor , shelves and assigned areas according to product categories
- Assisted coworkers with projects to learn new tasks while gaining additional responsibilities.
- Tracked inventory, conducted cycle counts to resolve issues to maintain accurate records.
- Navigated forklifts safely to move items throughout warehouse and reduce injury risks
- Examined incoming shipments to verify quality and quantity and returned unacceptable items to suppliers for replacement.
- Bending, lifting, and moving products up to 150 pounds safely and efficiently.
- Demonstrated great teamwork skills with members involved in shipments.
- Accurately label and markover packages daily , while diligently examining labels and packages for defects or incorrect labels.
- Receive orders via phone and email .
- Conducting multiple order runs on bpcs for customer shipments to be shipped in a timely manner.
- Performing customer credits and returns
- Billing invoices daily
- Performing daily forklift inspections before use
- Changing propane bottles when needed on forklifts
- Opening and closing shop , ensuring all doors/gates are closed and locked as well as lights shut off
- Disinfecting door handles , forklifts, tables for health safety
- Running work related errands for coworkers
- Assisting with cleaning machinery
- Completing Work Order returns
- Scheduling freight trucks for pick up and drop off
- Performing picked not invoice daily
- Filing paperwork for myself or management
- Creating quotes for customers via phone or email
- Scanning requested paperwork by team members
- Performing projects requested by management
Extruder A
Hydro Extrusions, Cressona
06.2018 - 01.2020
- Changed saw blades and repaired machines
- Performed basic maintenance and upkeep on equipment
- Operated hand and power tools to clear jams, adjust positions and trim rough edges
- Mentored newly hired employees on machine operations and implemented training on safety procedures to prevent injuries
- Kept work area clean, neat, and free of safety hazards to maximize efficiency
- Operate headstock stretch at 6 hour switches
- Pull all bow, kinks, dents out as much as possible but keeping dimensions in spec
- Measure all extrusions to aluminum association standards if customer specs are not listed
- Measure all dimensions and cut lengths and record all data
- Accepting or rejecting extruded product at inspection table
- Communicate to operator if there are any defects caused by the press to lessen amount of scrap to ensure customer quota is met for the job
- Completed pre ops on all equipment including cleaning, adding fuel, and servicing equipment
Quality Control Inspector
Dura-Bond Steel mill, Steelton
05.2016 - 11.2017
- Printing paperwork for all operators for the job or jobs being done that day
- Making sure all defect sheets regarding the job are available to all work floor employees
- Making sure pre ops on all presses are done by the operators
- Calibrating all equipment before start of shift for myself as well as the equipment needed by the operators
- Ensure all steel is not contaminated before being coated
- Record all data needed for customers and management
- Perform tests on coating (inside and outside)
- Perform tests on steel
- Accept or reject any pipe in question regarding steel or coating defects
- 2 part certified on coating
- Record batch records used through the shift
- Follow NACE requirements on all steel pipe, report any that are out of tolerance
Side planar operator
Dura-Bond Steel mill, Steelton
03.2016 - 05.2016
- Documented daily production data and submitted accurate, timely logs to keep management up to date
- Completed minor machine maintenance, including oiling parts and cleaning components, to maintain performance
- Removed and replaced worn machine accessories to keep products within desired tolerances
- Read and understood blue prints, product specs and tooling instructions to plan correct operational sequences and prevent material scrap
- Operated equipment in accordance with company procedures and customer requirements
- Monitored feed and speed of machine
Lift tester
JLG Industries, Shippensburg
04.2015 - 03.2016
- Operated, monitored and cleaned boom lift and related areas
- Perform timely and complete boom lift inspection
- Inspected all lifts after leaving assembly line before performing tests
- Conducted daily inspections, preventive maintenance and basic repairs on finished / passed lifts before being shipped
- During testing performed repairs on any lifts that needed hydraulic line repairs, electrical repairs, as well as minor motor repairs
- Record all data from each lift during testings after assembly
Petcare Associate
Petsmart, Harrisburg
02.2014 - 03.2014
- Met with pet parents, discussed what petsmart offers ( at harrisburg facility as well as others) like lodging, grooming and daily care services and cross sold speciality products like bows , ribbons , pet toys and treats
- Reviewed inventory levels during shifts and placed orders to replenish supplies, including shampoos, dog/ cat food and treats and toys
- Kept pet parents and pets safe by remaining alert to environmental conditions such as adoption days, holiday sales , peak heavy customer flows
- Removed animal waste from tanks and cages
- Checked in store animals for injuries or illnesses
- Monitored multiple animals ( small mammals, birds , fish and reptiles) after being received for new shipments or that just came back from vet visits
- Removed soiled animal bedding immediately to reduce risk of infections
- Demonstrated products to pet parents , discussed features and redirected objections to capture sales
- Helped customers sign up for loyalty programs and submitted completed paperwork
- Educated customers on products and service offerings
- Stocked shelves and supplies and organized displays to focus customers attention on specific products
- Restocking shelves in appealing and organized arrangements to promote items
- Observed customer behaviors to identify security threats and escalate concerns to supervisors
- Stayed up to date on store promotions, payment policies and security practices
- Recommended merchandise to customers needs and preferences
- Met or exceeded upselling, donation targets on consistent basis by leveraging excellent communication and interpersonal strengths
Education
High school diploma -
East Pennsboro High School
Enola, PA01.2011
Skills
- Reliability
- Self-motivated
- Team player
- Workplace safety
- Resilient
- Time management
- Training and mentoring
- Customer service
Timeline
Inspector
Cleveland Cliffs
05.2024 - Current
Saw Operator
Cleveland Cliffs
05.2024 - Current
Overhead Crane Operator
Cleveland Cliffs
05.2022 - 05.2024
Warehouse tech / Inventory & logistics
Epiroc, Harrisburg
01.2020 - 05.2022
Extruder A
Hydro Extrusions, Cressona
06.2018 - 01.2020
Quality Control Inspector
Dura-Bond Steel mill, Steelton
05.2016 - 11.2017
Side planar operator
Dura-Bond Steel mill, Steelton
03.2016 - 05.2016
Lift tester
JLG Industries, Shippensburg
04.2015 - 03.2016
Petcare Associate
Petsmart, Harrisburg
02.2014 - 03.2014
High school diploma -
East Pennsboro High School
Similar Profiles
Robert J. CapehartRobert J. Capehart
Senior Division Manager - Primary Operations at Cleveland-Cliffs Burns HarborSenior Division Manager - Primary Operations at Cleveland-Cliffs Burns Harbor
Tyren WalkerTyren Walker
Forklift Operator & Slitting Line Operator at Cleveland-CliffsForklift Operator & Slitting Line Operator at Cleveland-Cliffs
NICOLE PLASENCIANICOLE PLASENCIA
Overhead Crane Operator at Cleveland CliffsOverhead Crane Operator at Cleveland Cliffs
John KeechleJohn Keechle
Maintenance Supervisor Continuous Casting Dept. at Cleveland-CliffsMaintenance Supervisor Continuous Casting Dept. at Cleveland-Cliffs
Nicole MarraNicole Marra
Veterinary Tech at Kingston Veterinary ClinicVeterinary Tech at Kingston Veterinary Clinic